Thread: need some intake help

Originally Posted by bluegtp91

So just open cone that ugly broad

the filter hits all the abs crap. even the long thinner cone. i did a dry test at the parts store where i bought the one i wound up with. then went and got all the tubes and clamps at the home depot.

Like do i need a certain filter size? Or whats needed to bolt it on correctly? I'm new to all this it just confusing to me without a guide of some sort.

Originally Posted by GTLGDP

Like do i need a certain filter size? Or whats needed to bolt it on correctly? I'm new to all this it just confusing to me without a guide of some sort.

Link in signature guy.

Has all the info you need.

the filters usally come with a 4 inch opening and a 3 inch adapter to make it fit either size, the pvc pipe i belive was 3 inch pipe, but the one side is 4 inches because its fatter to let a 3 inch pipe slide into it and be sealed in its original use it was intended for.

note how one side is fatter, thats the 4 inch side, the thin side matches the t body.this is how i painted mine too.

That is the best gutter setup I've ever seen

Originally Posted by bluegtp91

That is the best gutter setup I've ever seen

lol thats hanging off my 7 th floor balcony, its clipped to the 8 th floor balcony metal trim work. nice view huh? got a 7-11 across the street too.

If i had open cone it would hit all of this **** i'm pretty sure. Unless i'm just stupid, in that case, please excuse my stupidness.

Your abs module is sideways from what mine is. It shouldn't hit that though

With that tiny little filter you have...I doubt it.

Get rid of all that restrictive, tiny pipe you got there...and go to auto zone and get a 6" Spectre Filter...whatever color you want...and toss it on the end of the TB...

The air filter on it right now is 9". Where does the temperature sensor go if all the tubing is gone?

In the filter

In the filter? I don't exactly understand what you mean lol do you have a picture or something?

Just tuck it inside when you slap it on the tb... My does touch the abs thing a little but not too much.

So slip it inside the filter, then put the filter on the tb just dangling in there?

then just tuck the sensor inside the filter a bit...

gotcha, thanks.

right on....

I get it.

I learn good with coloring books too