Thread: Issue after intercooler install, car revs high then drops way low

The smaller hole is one i drilled out to get the rear pvc working with the zzp stage 2 IC. usually they make the hole bigger but i just have it at that size. Here is a pic of what zzp's modified lim's look like.
Both the holes were surrounded with rtv when the ic was installed, its just hard to see in this pic.

Originally Posted by Beatdowncity

The smaller hole is one i drilled out to get the rear pvc working with the zzp stage 2 IC. usually they make the hole bigger but i just have it at that size. Here is a pic of what zzp's modified lim's look like.
Both the holes were surrounded with rtv when the ic was installed, its just hard to see in this pic.

Ahh got it...might need to open it up a little bit more..