Simple Intake (pictures)

[Scottydoggs]

the one side of the elbow is 4 inch o/d the other side is 3 inches.


see how one side is fatter on the elbow.

[PioneerGTP]

i see. but if i get those exact products shown, my intake will fall off pretty easily? if so what are the correct types i should get to prevent my intake from falling off over time

[dazedandconfused]

i see. but if i get those exact products shown, my intake will fall off pretty easily? if so what are the correct types i should get to prevent my intake from falling off over time

Mine is done with those exact products and only time it comes off is when I take it off.

Sent from my iPhail

[PioneerGTP]

alright thanks, ill probably do this tonight or tomorrow then.

[Scottydoggs]

the only thing you may want to change is the hose clamps that come with the rubber coupler and get 2 new ones from a auto parts store.

[PioneerGTP]

okay i keep hearing different things. is open cone a good idea or bad idea?

[Fivefingerdeathpunch]

Open cone is a type of filter.

Just make one like they have on here. Pick what style you want, its not going to be bad for the car.

[gtpeddie]

what did all you 97 guys do with your large PCM? it doesn't like to fit where the factory air box is

[Sven the Sexman]

Mine is now a vertical PCM standing on the plug held down by a bracket.

[gtpeddie]

i want to find a way to make it look nice, this is mine as of now

[Kolton Lock]

My 98 has the overflow bottle behind the drivers headlight and the pcm is zip tied vertically to that lol sucks cause I have a 9 inch filter...

[Sven the Sexman]

Mine is tucked tight to the rad support/coolant reservoir with a homemade bracket holding it down...it doesn't look bad surprisingly.

[gtpeddie]

Mine is tucked tight to the rad support/coolant reservoir with a homemade bracket holding it down...it doesn't look bad surprisingly.

can you PM me a pic when you get a chance, no rush

[Sven the Sexman]

It'll be next weekend at earliest. I never took a pic of it because the wiring wasn't finished next to it.

[RedneckGTP]

cool. gonna give this a shot.

been wanting to hear my SC more.

[Odi]

guys get rid of those corrugated hoses RIGHT AWAY.

[matt5112]

guys get rid of those corrugated hoses RIGHT AWAY.

bonnie guy proved that doesn't make a lick of difference at turdy-eight hundred power levels.

[Odi]

bonnie guy proved that doesn't make a lick of difference at turdy-eight hundred power levels.

not my point, they look like absolute poopsicle.

[GrandPrix06GT]

Thanks newarkk, I finally got mine done. I hope the image uploaded because im having a really hard time figuring out how to do it. It keeps telling me files are too large evn tho im doing it thru photoshop.

Mine is a 2006..Also idk if I can mount the iat sensor in the pvc piping because then its before the maf sensor. Pardon my stupid queation but I didnt know if thatd be an issue because on the stock intake it was maf then the iat. My cone is a 4 inch so I couldn't switch them ariund as far as tb size and maf size. This is the only way it would work.

[91parkave]

Thanks newarkk, I finally got mine done. I hope the image uploaded because im having a really hard time figuring out how to do it. It keeps telling me files are too large evn tho im doing it thru photoshop.

Mine is a 2006..Also idk if I can mount the iat sensor in the pvc piping because then its before the maf sensor. Pardon my stupid queation but I didnt know if thatd be an issue because on the stock intake it was maf then the iat. My cone is a 4 inch so I couldn't switch them ariund as far as tb size and maf size. This is the only way it would work.

Thats because you need to copy the IMG CODE and then paste it with your reply no need to attach anything. your pic will show up just fine. As far as your IAT sensor it dosent matter post or pre maf but ideally youd want it close to the cone filter so it has the coldest air moving over it.