Some more top swap questions! Yay!

[suitercrew]

Is it ok if i put a very small amount of oil on the seal and valve stem?

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

id only lube the stem, if that even. you want the bottom dry so its a good seal and holds it tight. if you got them plastic caps they slide on pretty easy.

[Tonkin2000GT]

Yeah or assembly lube it won't hurt.

[suitercrew]

How freely will the valve move with the seal on?

Sent from my LG-D851 using Tapatalk

[suitercrew]

I used the socket i put oil on it and it took me 10 minutes of applying a lot of pressure to get it on and i dont even think its on all the way i dont understand why this is so hard

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

it will hold the valve in pretty much. once its running the stem gets oiled.

[Scottydoggs]

i had a round ring indented in my palm lol tap it on there.

[suitercrew]

Like this lol

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

yup lol

[suitercrew]

So now i got the seals on and i went to put my new l76 springs on and it doesnt look like there wide enough to go over the valve guide...

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

they fit

[suitercrew]

Also im ordering all my parts and was gonna get new plugs should i go with the autolite 103s or 104s?

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

104's are working good for me.

[suitercrew]

Ok cool!

Sent from my LG-D851 using Tapatalk

[suitercrew]

Ok so half my valve springs dont fit, the ones that do ate a very tight fit but its like other valve guides are slightly bigger not that they look bigger but i took one spring that wouldnt fit on 2 guides then put it on another and it fit perfectly sooo this sucks.

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

flip the spring over maybe?

[suitercrew]

Lol yah i already checked that haha. So the question is can i try to bend the bottom of the spring out just a hair so it will fit or take a grinder ore something and shave a little of the inside of the spring seat?

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

pics. the springs should fit.

[SubwayGuy]

Lol yah i already checked that haha. So the question is can i try to bend the bottom of the spring out just a hair so it will fit or take a grinder ore something and shave a little of the inside of the spring seat?

Sent from my LG-D851 using Tapatalk

Do you have stock springs, or bigger springs?

[suitercrew]

Im trying to install l76 springs

Sent from my LG-D851 using Tapatalk