Is it ok if i put a very small amount of oil on the seal and valve stem?
Sent from my LG-D851 using Tapatalk
Printable View
Is it ok if i put a very small amount of oil on the seal and valve stem?
Sent from my LG-D851 using Tapatalk
id only lube the stem, if that even. you want the bottom dry so its a good seal and holds it tight. if you got them plastic caps they slide on pretty easy.
Yeah or assembly lube it won't hurt.
How freely will the valve move with the seal on?
Sent from my LG-D851 using Tapatalk
I used the socket i put oil on it and it took me 10 minutes of applying a lot of pressure to get it on and i dont even think its on all the way i dont understand why this is so hard
Sent from my LG-D851 using Tapatalk
it will hold the valve in pretty much. once its running the stem gets oiled.
i had a round ring indented in my palm lol tap it on there.
Like this lol http://i1030.photobucket.com/albums/...psfm4v9dd0.jpg
Sent from my LG-D851 using Tapatalk
yup lol
So now i got the seals on and i went to put my new l76 springs on and it doesnt look like there wide enough to go over the valve guide...
Sent from my LG-D851 using Tapatalk
they fit
Also im ordering all my parts and was gonna get new plugs should i go with the autolite 103s or 104s?
Sent from my LG-D851 using Tapatalk
104's are working good for me.
Ok cool!
Sent from my LG-D851 using Tapatalk
Ok so half my valve springs dont fit, the ones that do ate a very tight fit but its like other valve guides are slightly bigger not that they look bigger but i took one spring that wouldnt fit on 2 guides then put it on another and it fit perfectly sooo this sucks.
Sent from my LG-D851 using Tapatalk
flip the spring over maybe?
Lol yah i already checked that haha. So the question is can i try to bend the bottom of the spring out just a hair so it will fit or take a grinder ore something and shave a little of the inside of the spring seat?
Sent from my LG-D851 using Tapatalk
pics. the springs should fit.
Do you have stock springs, or bigger springs?Quote:
Originally Posted by suitercrew
Im trying to install l76 springs
Sent from my LG-D851 using Tapatalk