Thread: Devilsown Stage 2 Progressive Alcohol Injection Install...

Page 1 of 2 12 LastLast
Results 1 to 20 of 37
  1. #1 Devilsown Stage 2 Progressive Alcohol Injection Install... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey Guys,

    I haven't been on much lately, been working mostly 16 hour days which leaves me pretty much worn out. I had a little bit of time on Saturday and Sunday to get my Devilsown Stage 2 Progressive 3800 Alky Kit installed on my 1999 GTP. Here are my pics...


    Bumper removed ready to get started...











    Theres my washer tank, time for some modifications...



    Nice flat indention, perfect for a fitting...



    Scoring a mark/bit guide...



    Drilling the hole...



    Flushing out the shavings with distilled water...



    Tapping threads into the tank using an 1/8"-27 NPT tap...

    Last edited by GeddyLee; 04-18-2009 at 03:57 PM.
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  2. #2 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Flushing out the shavings once more...



    Testing the new threads I made...



    Fitting and washer with rubber seal I'll be installing...



    Fittings with some thread sealer and grey RTV which will be used...



    Fitting, washer, rubber seal put together and thread sealer applied...



    A little RTV applied on the washer tank itself, overkill I know, but way not use it too?



    Installing prepped fitting...



    Fitting tightened and ready to go! Note, Elbow swivels too.





    Now its time to run some tubing...



    Starting from the drivers side, i'm running the tubing through the bumper support, going to the passenger side...

    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  3. #3 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    There it is...



    Connected to the washer tank! Be sure to leave plenty of excess tubing, keep in mind, you have some fog light buckets to clear once the cover is back on...



    Now its time to mount the pump and run the tubing to and from it...



    Here's where I plan to mount it, score some marks and drill some pilot holes. The kit comes with self tapping sheet metal screws, but I always prefer drilling a pilot to make the screw go in easier. Its up to you...



    Installing the pump to its new home...



    Mounted and ready to roll...



    Fittings for the pump, I used a little bit of thread sealer before installing. BECAREFUL TO NOT OVERTIGHTEN THE

    FITTINGS INTO THE PUMP, THE BODY IS PLASTIC!!! Note, Elbow swivels too.



    Fittings installed and ready to go, i'll wire it up later...



    Heres my prerun tubing, time to run it to the pump, make sure to pay attention to which way the flow arrows are

    marked on the pump. Be sure to leave excess tubing when mounting the inlet tube.



    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  4. #4 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0


    Time to run some tubing out of the fenderwell and into the engine bay...




    Now its time to tap a nozzle into the motor. Luckily for me, I already have a TB spacer perfect for this job.

    Bewarned, with my setup it was quite difficult to figure out a GOOD place to mount the nozzle. It took me quite

    awhile looking at it to figure out my best route away from heat and moving linkages...



    TB spacer off the car and on the work bench...



    Time for some drilling...



    Then my handy 1/8"-27 NPT Tap...



    Mocked up DO5 nozzle and 90 degree elbow...





    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  5. #5 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    After several test fits on the S/C with the TB in place I found the perfect angle to mount the nozzle, elbow, and

    check valve. I used thread sealer on all the connections, just to be on the safe side. It certainly doesn't hurt a

    thing. It enters right below the TPS sensor, you'll see...

















    TB spacer and TB reinstalled with gasket matched OEM Gaskets with a little bit of Grey RTV to help sealing.



    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  6. #6 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Now its time to figure out where to place the main control unit for the Devilsown kit. My plan from the begining

    was to mount it in the mini cubby by the headlight switch. I already have a couple of switches mounted, why not a

    control unit too? It should fit perfect. Here it is removed before modification...



    Drilled a hole in the cubby so the control units' wiring can run through...



    Mocking up the control unit in its new home...







    Now its time for some wiring, first we'll start running the wires, control unit, and modified cubby in to the dash

    of the car...



    After running it under the dash and nicely looming and seprating wires, I wired in the supplied 10 AMP fuse holder

    on the red wire power side and I tapped it into a switched 12V source. Since my Acc Power Drop is pretty much used

    up and on the other side of the dash, I used my Autometer Volts gauge power wire as a tapping point and spliced

    there. I took the black ground wire crimped on a ring terminal and used an existing bolt for the steering column

    mount. I proceeded to run the blue and green wires (longest wires in the bundle) to the passenger side wire

    gromment and ran the out into the engine like i've done many times before. After successfully getting the wires

    into the engine bay, I loomed them up and started routing the wires to there new homes. The Green wire goes to the

    MAP sensor and taps into the middle green wire (B) on the connector. The blue wire goes directly to the pump and

    wires into the Red power wire. Posi tap was used for the MAP signal wire connection, a butt connector with heat

    shrink was used on on the blue/red pump connection. For the pumps' ground I used a ring terminal and some shrink

    wrap to seal it off. Drilled a small hole and shot in a sheet metal screw on the frame rail beside the pump.









    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  7. #7 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
















    Control unit mounted with the dash put back together, interior/wiring complete...





    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  8. #8 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0








    Added loom to areas that may rub or get effected years down the road. I love loom, can't live without it! I loom

    damn near everything. Devilsown Alky kit completely installed and ready to roll...













    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  9. #9 Re: hkjljlkkln 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0




    All I got left to do is reassemble the front bumper/headlights, reinstall my STB, fill the system with fluid (once I figure out/decide what to run), gap my plugs down to .045, and figure out how to tune it. With my work schedule, that won't most likely happen until this coming weekend though. So it looks like the Trailblazer will be my driver this week.

    Hopefully my crappy pictures (yeah I know, i'm not a camera man) and brief descriptions help someone out who want to go this route on there GP. Took alot of time and work to get it all on this forum. Hope you guys enjoy this thread...
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  10. #10 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Great Write up! I plan to add this kit to my GTP sometime.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  11. #11 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    Donating Users GeddyLee's Avatar
    Join Date
    Dec 2007
    Location
    St. Louis Mo.
    Posts
    2,573
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Man dude!! That rocks!! Great work and like 01 said, great write up indeed!

    James Shafer
    2003 GP GTX SLP P/N 50066 (SOLD )
    2005 Nissan Pathfinder SE 4x4 (The baby hauler )
    St. Louis MO
    1.9 Modified Rockers, TOGs, 180 Tstat, PRJ 10.4 Wires, P/P Gen 3, SLP Ram Air Hood/Wizaired CAI, Gen 1 Spoiler, 3.4 ZZP Pulley, Desert Fox Tranny Cooler, Thrasher Shift Kit, 18" TSW Mondellos w/ AGX Struts, SSC Gen II Springs
    Reply With Quote  
     

  12. #12 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    TDCRacing
    Guest
    Awesome
    Reply With Quote  
     

  13. #13 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    TDCRacing
    Guest
    Wanna sell me that scan master Shawn? How much did ya pick it up for or did ya buy it new?
    Reply With Quote  
     

  14. #14 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    so youre running completely electrical from the MAP and MAF? i havent really looked at my stuff that much since it's cold as hell and i dont want to work in the cold, but i thought there was a port for a vacuum source too? would that not be easier than running off the MAP?
    Reply With Quote  
     

  15. #15 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,313
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    Quote Originally Posted by Bio248 View Post
    so youre running completely electrical from the MAP and MAF? i havent really looked at my stuff that much since it's cold as hell and i dont want to work in the cold, but i thought there was a port for a vacuum source too? would that not be easier than running off the MAP?
    i dont follow what you meant by that? i thought the controller only gets tapped into the MAP? does the new kit also reads and tap into the MAF as well?
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  16. #16 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    im not sure. i havent looked at it in a while since i havent really been trying to install it in the cold. i know there is an electrical connection to the MAP, but is there anything else? i thought there was a vacuum line as well? maybe a MAF connection too?
    Reply With Quote  
     

  17. #17 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,313
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    o ok, so u werent certain. i have the controller and theres only 3 wires: ground, switched 12v and the wire thats tapped to the map sensor, thats it.

    edit-other competitors like snow performance, IIRC, use the MAF sensor as a base of how much to spray the flow, but they're very pricey
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  18. #18 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    Bastard Reptile's Avatar
    Join Date
    Dec 2007
    Location
    Kansas City, MO
    Posts
    3,459
    Thanks (Received)
    0
    Likes (Received)
    2
    Dislikes (Received)
    0
    Good work Shawn! The install is pretty straight forward, and it's fairly easy if you take your time. The biggest PITA for me was wiring the controller, and making it go through it's diagnostic mode so that I could get it to work.
    Reply With Quote  
     

  19. #19 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks for the compliments guys! I appreciate it!

    The Devilsown kit I have uses the MAP only as reference for the Alky system, nothing else. Otherwise its pretty much self contained. I touched on the wiring subject above, Here it is...

    After running it under the dash and nicely looming and seprating wires, I wired in the supplied 10 AMP fuse holder on the red wire power side and I tapped it into a switched 12V source. Since my Acc Power Drop is pretty much used up and on the other side of the dash, I used my Autometer Volts gauge power wire as a tapping point and spliced there. I took the black ground wire crimped on a ring terminal and used an existing bolt for the steering column mount. I proceeded to run the blue and green wires (longest wires in the bundle) to the passenger side wire gromment and ran the out into the engine like i've done many times before. After successfully getting the wires into the engine bay, I loomed them up and started routing the wires to there new homes. The Green wire goes to the MAP sensor and taps into the middle green wire (B) on the connector. The blue wire goes directly to the pump and wires into the Red power wire. Posi tap was used for the MAP signal wire connection, a butt connector with heat shrink was used on on the blue/red pump connection. For the pumps' ground I used a ring terminal and some shrink wrap to seal it off. Drilled a small hole and shot in a sheet metal screw on the frame rail beside the pump.
    Thats all the wiring needed. No vacuum lines are used either, its all electric.
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  20. #20 Re: Devilsown Stage 2 Progressive Alcohol Injection Install... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Reptile,

    Can you tell me more about this diagnostic mode thing? I don't think I read anything about this in the instruction manual, but its been several days since I looked at it too so I maybe way off. What do I need to basically do? Tips or tricks? Thanks!
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

Page 1 of 2 12 LastLast
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •