Thread: Idle dropping and bouncing??

Originally Posted by ScottyDoggs

that split is your problem. you need to hit a parts store, advance sells the best little t's. you need a Y and some vac line that fits the tb, then some smaller line to push inside the fat line, the Y to the other two small lines and the new line off the tb.

you'll need to cut or pull off the old factory rubber end off the hard lines, then put a inch or so of new vac line on the end of the hard lines to the Y.

Originally Posted by ScottyDoggs

i just told you how to make a replacement. for less then 5 bucks too mind you.

Originally Posted by suitercrew

So theres two hoses that become one at the throttle body and then one go to the evap pruge solenoid and the other goes to the top of the fuel pressure regulator. Does anyone have a part # for this? I tried to custom make one but its not working out well.

Sent from my LG-D851 using Tapatalk

your kidding right? this is 3 times..........

advance auto has everything you need. never seen a parts store that din't have vac lines of all sizes.

advance auto also has the best t's your gonna find. they got a wall full of nothing but vacuum line hard parts.

this is what you want, and some vac line... http://shop.advanceautoparts.com/p/d...+f%2Ft%2Fy%2Fx

true that lol

i got every parts store but o'reilly's here. and a few you never heard of too lol not even napa has the wall of t/x/y's advance has.

ever see so many ap stores in one area like this,,,zoom in the dots just get more and more lol https://www.google.com/search?q=o%27...1&rlfi=hd:;si: