Thread: My Dark Green Metallic GTP - Solddd

No. lol

Originally Posted by REDCOMPG

So where's the other gauges.

O_o

You know it's a easy fix right? Takes you 10 mins tops!

Originally Posted by REDCOMPG

You know it's a easy fix right? Takes you 10 mins tops!

Would I need to jack it up? It's kind of lower in the engine bay where it would come out.

Threw some 04+ needles on it. Took forever to get the speedo working because of the needle hitting the clear cover, but it's all good now.

Hitting up the jy tomorrow. Wish me luck!

Very nice upgrade sir.

Originally Posted by TexasTanker19kilo20

Very nice upgrade sir.

Thanks! Wasn't too bad. Speedo is just a pain in the ass lol

howd you get the speedo to line back up?

when i did my overlay i had to drive at 10mph and stick the needle on at the 10 mark lol

I just stuck it on and it worked lol. Still rubs the screen a little. Just going to trim the needle a little bit more. But yeah, it just worked for me lol

mine would always read i was doing 8 or 9 lower than i was when i did that lol

maybe some change occurred between 98 and 01

that boat has an inboard v6. now all you need to do is put a supercharger on it

That boat? No, not a v6. Supercharged 4-tec.

They stopped using mercury motors in the seadoo jet boats a few years ago. Now they have 4 cylinder s/c motors with like 260 hp

The supercharger whine is crazy! Also, just ordered some oem style headlights from rockauto.

rockauto is great lol

So, my speedo needle took a dump. Now the thing is rubbing all the time. Just put my old needles back on for now. If I can get another speedo or tach needle I'll put them back on, but not for now.

check the connection in the back my gas gauge faield on me and it was the ciruict board not pluged in all the way i would check that and then wiggle the wires

Originally Posted by Tacolover

check the connection in the back my gas gauge faield on me and it was the ciruict board not pluged in all the way i would check that and then wiggle the wires

I'll just try and find another one. lol

Putting these in tomorrow!