Thread: Delilah....dyno rackar

Originally Posted by Mad Monkey

Strut mount covers?

O sh*t somebody guessed it.

Originally Posted by Mad Monkey

Strut mount covers?

thats what i was just gonna guess.

So could this causes a wobble I get in the steering wheel? It actually looks like the sway bar is bent but the bushings look shot

Swap the Bushing out you'll be good

Originally Posted by dsmuts

Swap the Bushing out you'll be good

O I plan to. Does the sway bar look bent? And could that cause the wobble that's been pis*ing me off for the last 2 months

It looks fine to me. Shouldn't cause a wobble

Originally Posted by dsmuts

It looks fine to me. Shouldn't cause a wobble

Son of a bit*h....I was hoping that was my problem.....fu*k

check the rest of the steering components, tie rods etc, could be the cause.

Originally Posted by Mad Monkey

check the rest of the steering components, tie rods etc, could be the cause.

OK so less than 5k miles ago I replaced tie rods, bearings, rotors, breaks and calipers, sway bar end links. Only things not new are sway bar bushings lower control arms and strut mounts

Just because you changed the bearings doesn't mean that they are not bad again. Friend of mine only got about 10,000 out of the high dollar bearing from Advance, If you got the cheaper one I'd be surprised that you got that far. Jack it up and see if you can find something loose, if you don't it may be time to get the wheels balanced. Bring it by here and we'll take it for a spin and take a look to see if we can find something.

i actually did check everything today and also cleaned it all. the bearing had no play at all in it and neither did the tie rods. as far as wheel balanced i had them balance checked as well already. their good.

My money is on the hubs

ugh...even if they dont have any play in them when i grab at the 6 and 12

My money is on LCA mounts.

Well got lots of goodies on the way for her. Poly sway bar bushings. Tranny cooler still on order, electric tranny cooler fans with manual on/off switch, new battery terminals, replacing the hubs today or tomorrow...(under warranty), and gonna put the new spark plugs and wires on as well this week

My car is gonna be a happy camper after this week...maybe she'll be nice to me for awhile and stop breaking


And then even more stuff came in an hour later

why do you need the term connections? and if it aint 2/0 it aitn worth it imo, what are you up to?

I agree what are you up to? And you never sent the dame picture you ass haha