|
|
09-25-2012
I bought a motor from advance auto parts about 2 weeks ago.Motor has a slight ticking/knock/ping.I could not get the old knock sensors out of old motor so i proceeded to install new motor until i could afford 2 brand new knock sensors.Could motor be pinging because of not having either knock sensors hooked up?Car is not a daily driver.anyone have similar problems/experience with knock sensors on a 3800 series II .CAR IS A CHEVY MONTE CARLO SS
09-25-2012
advance auto parts sells engines? (not to be off topic)
09-25-2012
Yes through a company called ATK/SPARTAN.ENGINE WAS $1749.00 "LONG BLOCK"
09-25-2012
You need knock sensors or you are going to have goofy programming running the car. I've never tried it out, but you'll either get a butt ton of timing or none I would assume.
09-25-2012
lol i wouldnt run it without knock sensors even a stock 3.8 can knock under a load
09-25-2012
Thanks guys.I ordered them this evening .They will be here in the morning.
09-25-2012
Make sure you torque them to the right specs.
And I dont think you can get at the rear knock sensor with the motor in the car, but I'm not 100% on that.
09-25-2012
Yes you can cam, been done plenty of times, you just can't see where you're grabbing lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
