Quote Originally Posted by SlowNA06 View Post
Doesn't it do a reset when you plug it in?
Never actually unplugged it. Just was checking if they worked.

Quote Originally Posted by Grimsin View Post
unplug the battery for 15 minutes then it should do it recalibration. that or pull a certain fuse.
Ill give this a shot tonight.

Quote Originally Posted by SnowDrift View Post
If I understand what you're saying, you're talking about the mechanical connection from the actuator to the door lever. Just determine what direction it operates and what the position should be by comparing the two from side to side. With it plugged in, but still not connected, mechanically, you can operate it using your HVAC control and put the rotor portion in the correct position.

No worries - just take a break for a bit and look at what is happening with the door, then at what happens with the actuator when operated and bolted in position. You'll get it.
Yea thats pretty much what Im saying. I tried this and it didnt work but everything worked just fine before hand. I had it off the door lever and after it spin however many times i could hit whatever button and wouldnt do much. Seems wierd I know they work just now its getting odd.