Thread: any Tech Tip for rocker install?

you dont need to take those off for LIM unless you're doing lifters as well.

It seems you can re-use them, I had to for a little while, but I put comp cams re-usable's in quite soon afterwards.

Originally Posted by matt5112

you dont need to take those off for LIM unless you're doing lifters as well.

It seems you can re-use them, I had to for a little while, but I put comp cams re-usable's in quite soon afterwards.

That what i thought to but i couldnt get the old gastket out without loosening the rockers. The old gasket had tabs that went around certain pushrods. I didnt think reuseing them would do anything serious but i figured id ask. Thanks didnt mean to hijack

Originally Posted by Blackbird87

That what i thought to but i couldnt get the old gastket out without loosening the rockers. The old gasket had tabs that went around certain pushrods. I didnt think reuseing them would do anything serious but i figured id ask. Thanks didnt mean to hijack

I think you're talking about head gaskets not LIM gaskets. Unless you have a 3.1

Originally Posted by OH4CompG

I think you're talking about head gaskets not LIM gaskets. Unless you have a 3.1

Ya 3.1