Thread: WIERD!!! has this happened to anyone else?

ive been searching for a while now, and still cant find what is wrong, i am hoping that someone can tell me whats wrong.

i have the digital dual climate control, and when i turn my heat on, the pass. side is hot, but the drivers side is the same temp as the outside temp. why is this? my a/c compressor clutch is out, so i cant test the a/c to see if there is a problem with the drivers side cooling as well.

am i the only unlucky one that this has happened to?

all help is greatly appreciated.

-Aaron

I am having a similar problem... but mine is with the drivers side warm and the pass side cold. Its driving me insane. Any help would be great.

Perhaps a vac line fell off the control, leaving at the default temp in the middle?

my blower motor dosn't work on my drivers side so it can seem at times like its blowing cold air try blocking the pass side and see if you get hot air on the drivers

Originally Posted by TurboTrav

my blower motor dosn't work on my drivers side so it can seem at times like its blowing cold air try blocking the pass side and see if you get hot air on the drivers

still cold.......

i think i might be low on freon. Mine did the same thing while i was adding gas. My ac lines were completly out of freon and during gassing up the passenger side was cold and the drivers side was warm. and as i added another 2 cans both sides were cold.