Printable View
till they look smooth. your only doing light pressure, its not like you can grind em to nothing, unless the pitting is that deep.
even the valve seats were pitted up some.
before.
http://i1097.photobucket.com/albums/...psdlvzryom.jpg
after
http://i1097.photobucket.com/albums/...psa0mlha77.jpg
That looks damn good.Quote:
Originally Posted by Scottydoggs
This us what i got http://i1030.photobucket.com/albums/...pswklpq6sf.jpg
Sent from my LG-D851 using Tapatalk
one more time then. its close.
Ok thanks scotty i gotta go to work ill update with more pictures later!
Sent from my LG-D851 using Tapatalk
I paid 150 bucks for a shop to do my heads I have on now to get a valve job like that, and you did it yourself. good job.
Hey quick question im about to buy my sd headers is there any difference in the ones they have on ebay and the ones on their website?
Sent from my LG-D851 using Tapatalk
Probably just the price
Also im buying all my bolts and gaskets right now do i need a new crankbolt? I didnt think so but noticed zzp had it in there top swap gasket kit
Sent from my LG-D851 using Tapatalk
re use the crank bolt.
Ok thanks everybodyy!!
Sent from my LG-D851 using Tapatalk
Ok so im getting my heads put back together minus the 1.9 rockers im still trying to find. I got felpro valve seals and im confused if im supposed to take the metal rings off to install them or just force it on?
Sent from my LG-D851 using Tapatalk
force it on.
Ok thanks
Sent from my LG-D851 using Tapatalk
yup, just push em on. if you got felpros mine came with a plastic condom to cover the locks so the seal slides past them smoothly and dont tear the seal up.
you can also use like a 10 mm deep socket to push them all the way down.
Well im just having trouble getting them over the valve guide's
Sent from my LG-D851 using Tapatalk
a thumb on both sides and push down. they are tight. why the socket helps, you can tap em on and down all the way.
Ok thanks scotty
Sent from my LG-D851 using Tapatalk
if you got a 3/8 drive 10 mm, put the ratchet side down, so its a flat area pushing the seal down.
Will doo!
Sent from my LG-D851 using Tapatalk