Swapped out my blower with a spare one from my old motor....must have missed somethin.....idles like shhhh now....but runs like a champ down the road lol
Sent from my SGH-I777 using Tapatalk 2
|
|
03-14-2013
Swapped out my blower with a spare one from my old motor....must have missed somethin.....idles like shhhh now....but runs like a champ down the road lol
Sent from my SGH-I777 using Tapatalk 2
03-14-2013
you broke a vac line end i bet. ^^^^^
03-14-2013
I was thinking it had to do with the vac system....now for a day off so I can properly look at it again....when I first started it...there was a loud squeal or screech....was unable locate source.....this morning it was quiet as a mouse until after I dropped my daughter off for school...then it came back....got to work...unable to get it to happen again so far...Originally Posted by scottydoggs
Sent from my SGH-I777 using Tapatalk 2
03-14-2013
Ordered a bunch of stuff for the car and attempted to install boost gauge and pillar pod. That part went well and quick then the $4 box of assorted vacuum T's were useless. Some fit the boost line while some fit the MAP line but none fit both together smh. And already had snipped the vacuum line so car has been immobile most of the day til I can get a ride in the morning.
03-14-2013
i gave it the spring wake up
03-14-2013
Not sure if I could be with out my gtp for the winter....I have often thought about how nice it would be to let it rest...but I would miss it too much lol
Sent from my SGH-I777 using Tapatalk 2
03-14-2013
i had a idler pulley that was on its way out, every morning it would growl a little bit.
spray some carb cleaner around the vac lines, if the idle jumps, you found your vac leak area.
03-14-2013
if you cut a factory plastic vac line, you can use a 2 inch piece of vac tubing to mate it back together, till you get the right parts.
03-14-2013
This is why I stay on this site....all the people I have encountered are ready and willing to help...:-)
Sent from my SGH-I777 using Tapatalk 2
03-14-2013
I know the statement was not for me...just sayin lol
Sent from my SGH-I777 using Tapatalk 2
03-14-2013
I missed my GP every day....
2007 GXP Originally Posted by Scottydoggs
03-14-2013
I haven't ever put them on any of my own yet but have been using them through the shop. Never had any complaints from customers. Only downside is they have to prepay for parts, wait a week to be called and scheduled in. Of course if they don't mind paying the Napa prices I have had good luck with the parts I get from them. Mine are warped, so perfect time to upgrade and replace pads.
Sent using Tapatalk 2 from my GS3.
03-14-2013
Cleaned and waxed my rims, plus used tire shine
03-14-2013
Tried to blow up the comp g and now I think it runs even better lol
03-14-2013
she likes it when you spank her lol
03-14-2013
I'm just gonna beat the hell out of her for a week or so maybe she'll repair herself all christine style lol
03-14-2013
thats a good plan, worst that happens is it breaks more
03-14-2013
Replaced lower rear quarter window trim on LHR door.
Still rocking roof rails on the GXP =]
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
03-14-2013
Removed the top end from the L26 got the l67 heads on and all torqued up. Found out that the 11 ft/lb torque spec for the lim bolts was never intended for used bolts......
Originally Posted by The Sunfire Guy
03-14-2013
u have coil on this seem really lowReplaced lower rear quarter window trim on LHR door.
Still rocking roof rails on the GXP =]
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
