one gallon is safe to -20, add more if you get colder than that.
|
one gallon is safe to -20, add more if you get colder than that.
I only got a lot because im going to flush with coolant after I use the hose to rid most of the well water out of the block. Then just do as per your how to and dump a gallon of coolant in the rad and add water till full. I just wonder the ratio I would end with, leaving however much 50/50 stays in the block after flushing the well water out plus adding a gallon of concentrate and flling the rest with water. If its stronger than 50/50 I wont complain because it got cold as **** last year.
Sent from the Milky Way
Sent from the Milky Way
run the car till nothing comes out, then dump the distilled water in flush till its clear, then add the coolant, and top off with more distilled water if need be.
How much water does it usually take after you add the gallon of coolant, I only bought 2 gallons
Sent from the Milky Way
It got buffed, cleaned and plenty of work done.
Bill I'm gonna drive up and swap some body parts lol
**** me the threads for my tstat are ****ed the bolt is bent ****n****
Sent from the Milky Way
How did that happen man? Either chase them, re tap with bigger bolts, or replace the lim if you need gaskets.
Russ...how can you possi....... you know Clay!
I think the PO douched it up, the bolt came off all weird, and the other side is missing a lot of threads to
Sent from the Milky Way
Probably going to have to replace the LIM, the bolt goes in at the completely wrong angle for a tap I think.
Sent from the Milky Way
Yay for taps!
Sent from the Milky Way
booooooo, no top swap needed lol
« Previous Thread | Next Thread » |
Tags for this Thread |