Hey guys, basically what I am trying to figure out is what all is necessary for a cam install job on a 04 GP Comp-G. I've narrowed down my cam choice to either a VS or an S1x and i plan on doing the install myself over about a few days next month during my spring break. I know i'll need springs, but i'm talking more totally inclusive besides just engine hardware. Specifically, what gaskets, bolts, chains, etc are needed?
I found this Installation guide,
http://www.3800pro.com/forum/cams-he...-l67-tech.html
But this is for a 98 L67 so i wanted to see if anybody knows any differences in what i will need and if possible, any different steps that i would have to take with the L32 and how it's layed out. I know it's basically the same motor, but i wanted to make sure before i start tearing it down based on that guide and find out something major is different.
Also, i've read through about 20 older threads in the last few days about cam choices and i know it's pretty much all personal preference. But just for giggles....
VS Or S1x?
