Thread: name those noises!

Yeah but you don't get cold waiting for the mail.

Sent from my Galaxy Far Far Away

I need my baby for work.

Some jb weld and that thing will be good as new lol

Sent from my Galaxy Far Far Away

Well I got the bracket and I got the bypass pulley.

I go to put it all on and guess what I find. One of the 2 bolts that holds the bracket 2 the block snapped inside the block. What do i do!!?

I have a cherry picker and a engine support bar.
I'm thinking I take the wheel off then take off the nuts holding the struts at the top. remove down pipe and lower evereverytging till I can get to it through the wheel well

Screw extractors maybe. I would try to lower just the front of the subframe as far as you can see if it gives you enough room.

Sent from my Galaxy Far Far Away

Only took about 45 minutes to lower everything and remove bolt... All done.