Torqued the screws in for the valve body, but before I did, I checked the torque on all the channel plate bolts. All good.
Oil pump next
Torqued
Harness was next, but before I put it in, I checked all the wires with the DVOM. No breaks
Side cover next. A little goop to hold the seal in place
It's on
I used one of the screws as a handle
Be sure to mark where the studs go before disassembly
Left axle seal was next. Make sure you have the proper tool
That's how she sits until I can fix the threads in the pan
Soooo close
