I have verified 12 volts to pin E on the transaxle connector, also checked ground straps on the bellhousing. Im an f-body guy most of my LT1 Transam sensor's are in the thousands on resistance, this is why I said 23K instead of 23ohms so I know all the solenoids are testing correct.Im going to disconncect the harness from the PCM and check voltage up to the computer so I know Im getting a complete circuit. As soon as I type this up I will go test and reply back what I find.
Thanks a million for the quick response Trannyman95, I actual stumbled across your website before I found this message board and it has been very helpfull to me.
Josh
