Thread: 97-03 Retrofit Resources

Originally Posted by Fivefingerdeathpunch

I had to cut the corners on the projector itself, just a little bit so they didnt touch the inside of the capsule. The shroud has to be hacked away big time aswell so it doesnt touch the inside of the capsule too. It will touch on just the edges when its all the way inside but I was still able to get them center in the hole.

Thanks for that info. I have one shroud cut away (to much in some spots), but it looks like I need to fine tune it.

I was just re-looking at LS01GTPs thread ( http://www.grandprixforums.net/how-r...-gp-75773.html ); he has some good pics showing how things need to be.

Last night I trimmed the shroud and one corner of the projector, and I can now get proper alignment. This pic is a bit low and right, but I can adjust that now upon the final install.






Thanks for listening.