Thread: HIDS, Alignment and Flickering

Alright

I have a Set of Black Halo Projecter headlights

with 6000k HIDS.

My Passenger side is Fine.

My Driverside HID Randomly shuts off

And when both of them are on They kinda look misaligned like I really dont know how to explain it except it looks kinda square then drops down Not like a normal headlight would Display the light on the road

the Light they give off isnt displaying like normal is there a way to fix that?

anything?

Do you have pics of the light pattern, that may help us a little more.
Maybe one from the front and one in the car..

For the one that shuts off, check you grounds, I have found thaty Hid's need a very clean ground.

Ive been Tinkering with it

and Dash Z

and a few other people said it might be a Wattage Problem?

any thoughts on that


Photos coming soon

do you have the reay harness? It draws a constant 12 volts off the battery. HIDs are also very powern specific, batteries are not a steady voltage all the time, hid's don't like this. My suggestion would be to buy the relay if you don't have it. If you have it it could possibly be a bad ballast or ground like I said before.

Hope this helps a little!
Eric

well if the ballst was DEAD the Light wouldnt come on at all

and if the ground was bad again it wouldnt come on


I think its a power problem

for some reason ONE of my lights gets plenty of power
the OTHER is being a douchebag.

='[

Where can i pick up the Relay for the HID's?


and the Odd light pattern is because they aren't aligned properly figured out what i need to do about that

I'm sending them back to Dash Z Racing.

tired of being disappointed with non working HIDS