Thread: Tuning for a 3.5" pulley upgrade

It hated the littler pulley. There was nothing to be done but fiddle with AFRs, which I exhausted. At the end of the day it didn't matter if the commanded ratio is + or - 0.3 with actual. I had tried 'em all.

Originally Posted by mechguy

It hated the littler pulley. There was nothing to be done but fiddle with AFRs, which I exhausted. At the end of the day it didn't matter if the commanded ratio is + or - 0.3 with actual. I had tried 'em all.

not sure what that's suppose to mean, guess we'll never know since you can't post a simple scan.

Originally Posted by jdmgtp

not sure what that's suppose to mean, guess we'll never know since you can't post a simple scan.

are you talking about? There are scans at the beginning of the thread. Furthermore, if you cannot understand tuning, don't play in the PCM section.

You're posts vividly illustrate your lack of knowledge.

Haha, ****ing joke. I gave you specific instructions for posting a DECENT scan so we could help you. I've tuned many many different combinations which I've gotten paid for and have nothing to prove to you buddy. Have fun with your stock pulley.