I'm completely lost here and im about to sell this thing, all this time and money into it and I cant even enjoy it because im always chasing something stupid.
Enough ranting, recently installed my XP cam (current mods are in my signature). Did some WOT pulls first few pulls saw 1-4* of kr so I tried going back to stock timing table. Worse... ended up seeing up to 8* of kr! Scared shi*less to even get on it I removed more timing and went from my 3.2 pulley to my old 3.4 and saw just about 10* of knock.
The reason this is in the "PCM tuning" category is because im still new to HP tuners, while I have done the basics such as fuel trims and ect im sure I could be overlooking something. Im thinking my knock attack or decay is just messed up or something it just doesn't look right on the graph. Also my AFR is reading a rich but healthy 10.5 ish at WOT so my injectors are not going static unless im missing something.
Another thing i noticed my MAF htz is reading 10,700 ish at the highest with the 3.4 but I was seeing the same numbers with the 3.2. am I somehow maxing out my maf? I thought max is 11,500? Before the cam and ported heads I had a max of 2kr on any heat soaked WOT run.
Any help is GREATLY appreciated, I hate being being a newbie tuner.
http://www.filedropper.com/3-3-17rerribleknock
http://www.filedropper.com/holy****_1
