Thread: Test your 3800 knowledge (Guessing welcome)

1. 1995
2. 4t60
3. 3 nuts, and one support bracket going to LIM
4. 2
5. 90 cubic inches of air moved with each revolution
6. 15mm
7. 1
8.Powertrain control module
9. on the oil filter adapter
10. 6
11. m8x1.25
12. 3/8x1.5?
13. 8mm 13mm some aftermarket 14mm and 10mm
14. 4t-60
15. no
16. 10mm
17. fog light
18. yes
19. 3
20. century, regal
21. 8
22. knock sensor harness extension
23. yes, I think SE uses 2.25 pipe all the way to the single muffer
24. no clue
25. 5/16s
26. yes
27. W?
28. right and wrong for the l67
29. 10min for the hose, 20min bleed, half hour for drinking
30. 3

Originally Posted by TheOtherNick

1. 1995
2. 4t60
3. 3 nuts, and one support bracket going to LIM
4. 2
5. 90 cubic inches of air moved with each revolution
6. 15mm
7. 1 Sorry, try again
8.Powertrain control module
9. on the oil filter adapter
10. 6 You are closer than some, not correct though
11. m8x1.25
12. 3/8x1.5? could give that to you. M10 x 1.50
13. 8mm 13mm some aftermarket 14mm and 10mm You've changed many in your time
14. 4t-60
15. no Incorrect 97 retained the same bolts as the 4T60, larger diameter
16. 10mm
17. fog light Accessory meaning engine driven. Sorry probably should have been clearer
18. yes
19. 3
20. century, regal Century TMK was never available in anything but unheated couch cloth. Monte, Gimpala
21. 8 Sorry incorrect
22. knock sensor harness extension
23. yes, I think SE uses 2.25 pipe all the way to the single muffer GTP uses 2.25
24. no clue
25. 5/16s
26. yes
27. W?
28. right and wrong for the l67 Hahahaha
29. 10min for the hose, 20min bleed, half hour for drinking
30. 3

Nick..you can stop by anytime buddy. Likely you'd walk right up to the toolbox and know where everything is.