Progress today, although not much. My migrane decided to interfere with that. I'm breaking for dinner right now, but I already have the drivers side front door tore apart and cleaned, just have to peel n seal it. We also finished up the trunk, except for the floor and rear deck, it's good. Trunk lid, rear quarters, and the ass are done. I ended up covering the door skin and the inside sheet metal that the door panel attaches too. I don't have very good pics of the passenger side, but here they are:
Along the way:
And right before I sliced out the 2 screw holes for the door panel, I used some wire loom to run the door lock linkage through:
Last night I was up til 3AM re configuring my gain structure, I used my multimeter to check the voltage since I don't have access to a scope, but it came out GREAT. Between the Peal n Seal and doing the gains, it sounds a like a totally different stereo. I had problems with some songs over-driving and other songs being flat, and this fixed it! So far I've only used a roll and a half of peal n seal, I still have 2.5 rolls left, I hole to have all 4 doors done and the rear deck.
