Thread: Red 2006 Grand Prix GT Supercharged

Originally Posted by OmegaRed

yeah my morimoto mini's touch the front clear cover

Yeah thats why i think im gonna cut the holes bigger so they sit back n the shrouds touch the lens. Hide all the jb weld and look cleaner and I could keep the chrome that way. If I dont run into problems that way that is.

Originally Posted by REDCOMPG

Buy 3M Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit, 12 Per Case 08612 at Advance Auto Parts

That looks like the rubber butyl..but is it just higher grade like classy pontiac just posted?

Originally Posted by REDCOMPG

Cut the hole bigger if you want the projector and shroud to sit closer to the reflector.

Okay gotcha, that answered my question n I think itd hide everything better for the chrome that way. Ill mess with it when I can n make sure. Thanks.

Originally Posted by Classy Pontiac

This is the window weld I am talking about.

3M/Window-Weld black super fast urethane (08609) | | AutoZone.com

Yeah thats a good way to seal it def for sure. I might look into it just to be positive it seals the first time. Thank you sir

Originally Posted by spazzz

Did you clean the old stuff off first. When I do mine I would rather use the caulk type adhesive. Seems to be a much quicker failsafe bond.

I just took off the extra compound off the clear lens and just left the rest in the black housing. And then I just used the caulk window weld and to be honest I couldnt be happier!

Originally Posted by Classy Pontiac

I just took off the extra compound off the clear lens and just left the rest in the black housing. And then I just used the caulk window weld and to be honest I couldnt be happier!

Good to hear thats the cure for the leaks then, thanks for the info!

Originally Posted by GrandPrix06GT

Good to hear thats the cure for the leaks then, thanks for the info!

No problem! Have any other questions or concerns just ask!

Originally Posted by Classy Pontiac

No problem! Have any other questions or concerns just ask!

Lol I may have some when I go to aim n mount em. Seems like I have the jist of it but may have a couple little dumb questions that ill just need a little reassurance for lol

they dont look THAT bad touching

Originally Posted by OmegaRed

they dont look THAT bad touching

Naw that looks good, just would be harder to hide with the chrome.

Just a little easter present for myself! Thanks to OrangeL67. Prob take the stickers off n shine her up! Happy Easter everybody!

Great score on the STB.

Originally Posted by TexasTanker19kilo20

Great score on the STB.

thanks! I seen you wanted everything else from him so I saved it for ya!

Went n cut out with a hole saw. Traced through the projector housing n just cut it till the projector could clear with a little wiggle room!

cant figure out how to tie in my hi beam splitters tho. I hooked them from my projectors into the black and blue but for the black male splitters I don't see how them can hook up into my hi beams?


i don't know what or how to tie the bottom black things into w.e they go to. Any help or pics would be appreciated!
Then I might try n mount n aim them tonight if its not too cold

Yup what's the need for the splitter for?

The projectors are lows and highs n you need the hi beam splitters for that to be possible. If I cant figure it out for now it doesn't matter. I never use my hi beams nor am I in the country too much to even use em lol. But just figured since I got it, if I could hook them up its be better

Em no you don't sir.Just splice and wire them into the factory high beams.

Good work. One day i shall do this.

Originally Posted by REDCOMPG

Yup what's the need for the splitter for?

Trs said I needed them for my highs!! If I dont need them than good, ik how to hook it all up then haha. but then what does the red n black wires from the projector hook up to? Im pm'ing someone n they said it goes to the hi beam splitters like in the picture n then idk where the rest goes..