Thread: Delilah....dyno rackar

i meant the grammar filter. lol

This has been a very good weekend. Solved my major oil leak. Fixed the engine running hot problem. And so far I think I fixed my electrical problem.

Sent from my HTC6525LVW using Tapatalk

And this is the stock wiring I removed.



Sent from my HTC6525LVW using Tapatalk

being i know all you v8 guys read this thread. ill post this here http://hudsonvalley.craigslist.org/pts/4857554837.html

Piece of junk manifold, waaaaaaaaaaaaaaaay too much doll hairs.

And they won't fit, for the most part.

Not like we really warrant the need for all that, anyways.

So this misfire looks like it's gonna be annoying to solve. Spark plugs look fine. Even though I think I cracked one during removal.
Originally it came up P0307 cyclinder 7 misfire then turned into P0300 multiple random misfire and the cyclinder 7 one went away.
Here's 7 with a new plug.



Less than 15k miles on this set of plugs.

Sent from my HTC6525LVW using Tapatalk

Strangest part of all....I drove it to the gym. Worked out. Was on my way back and bam it started. Misfire constantly. Could feel it very noticeable. Drive to parking lot and parked.

Sent from my HTC6525LVW using Tapatalk

Well engine is coming completely apart this week.

Sent from my HTC6525LVW using Tapatalk

I know what happed. One of the stupid DoD lifters collapsed. Here's some pics.


In the below picture the valve was full of fuel.





Sent from my HTC6525LVW using Tapatalk

that sucks. time to just turbo it

No all most with direct port bottle fed

Sent from my HTC6525LVW using Tapatalk

I'm pretty sure you can just swap em for LS7 lifters and be on your way because I assume you have DOD shut off.

If u swap lifters u have to completely remove all DoD components including cam

Sent from my HTC6525LVW using Tapatalk

Yup definitely a lifter. Wonder which one is bad Lmfao.

That DOD oil build up though.


Started cleaning the pistons off.

One out of 8 completely clean.

And the way it sits for tonight.
Thin coat of oil on each cyclinder and piston to keep it from rusting.

Damn cleaning this stuff is a pain.



Sent from my HTC6525LVW using Tapatalk

So how much were the new dod lifters?

And use this if you have a die grinder or drill that use these to clean gasket material off and carbon. They wont eat the aluminum away or harm it if you are smart.


3m Roloc bristle discs.

**** I was gonna replace all lifters. But each DOD lifter was 55 bucks. So just replacing the one for now.

Sent from my HTC6525LVW using Tapatalk

Who sells those brushes

Sent from my HTC6525LVW using Tapatalk