|
|
03-19-2011
thanks for the info. i'll try to get you some pics today, and i'll look at the carb. i doubt i'll ever mess with the heads, i'm trying to get a 3800 built. seems ass backwards to try to make the gp go fast when i have this, but i'm into the build already, and i need to finish it lol
03-19-2011
3800 twin turbo FTW
03-19-2011
You forgot to add 3800 tt in the dime lolOriginally Posted by Deimos
03-20-2011
lol i can't keep those sh!tty 235 street tires hooked now, let alone going twin turbo
03-20-2011
stock frame boxed with 275 drag radial's= wheelies with a twin turbo 3800 in the dime
03-21-2011
wheelies could be a lot of fun... lol
well, oil pan gasket got fixed (again) tonight. let it warm up and i didn't see any drips coming from the pan or any bolts. but i did see drips. upon closer inspection, this is my thought process:
"insert dirty words here"
"that's not where my head was at all day...
"why is there oil on my bellhousing"
"headers are above the oil pan, why is there oil draining down my headers?!?!"
"aftermarket intake... sunofab!tch..."
sure enough, i see oil draining out of the back of the intake gasket.
brick, meet face.
03-21-2011
at least the intake is super easy to change
03-21-2011
please tell me i don't have to mess with the distributor too much. i know for sure i'm a rookie when it comes to that
03-22-2011
You have to pull the distributor out to change it. It's not to bad just look where it is at when you take it out mark it and put it back in the same way.
03-22-2011
The right stuff is what I used but black silicone works very well too
03-22-2011
well hopefully when i take the intake off, i'll fix the oil leak, coolant leak from the upper radiator hose, and seepage from the intake bolts all at the same time. then all i'll be leaking is trans fluid and coolant from my rigged overflow tank
03-22-2011
just mark on the firewall where the rotor is pointed.
03-22-2011
it has the HEI, does that change anything?
03-22-2011
no it simplifies it.
03-22-2011
yes and when in doubt there is the old tried and true with many many articles able to help you at s10racer.com guys in the chat box know their stuff but you don't have to take my word for it.
03-29-2011
Clean looking truck man. Making progress on it? If you'd rather not pull the intake, you can try cleaning it up where it meets the block and then putting a thick bead of RTV over it. A brand called Right Stuff is awesome, would probably seal it up.
03-29-2011
oh yeah, it was a pretty good day off.
the black spot in the back? that's not a shadow...
and possibly why it was leaking...
maybe not, because it was a lot more prevalent on the right side. going from the transmission and the fact that i watched it drip from the right side, it might not be an issue. i don't have an tools to get it out, i might just have to get crafty with the RTV. where do i get this Right Stuff that you're talking about?
03-29-2011
Ouch. I'd definitely work on getting that bolt out. If the gasket doesn't seal there, you could have coolant leaking into your oil and not know until it's too late. Right stuff should be at any parts store by the other RTV's.
03-29-2011
yeah, that's a good point. i don't really have a drill that can get at it though...
03-29-2011
Soak it with penetrating oil for a few days and try vise grips. Maybe you could borrow a 90 degree drill or get a cheap one from harbor freight if you can't get it out.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
