Thread: How to replace front hubs

The job is much easier if you use a 1/2 dr size reduced to 3/8. We used 3/8 ratchet on the first one, thats why the bolt got rounded off..............The top bolt, a short 3/8 6 point and a wobble extension worked great.

Originally Posted by marnav1

The job is much easier if you use a 1/2 ratchet reduced to 3/8. We used 3/8 ratchet on the first one, thats why the bolt got rounded off..............

Or you buy a 1ft 3/8 drive with good sockets.