Quote Originally Posted by QwikGT View Post
looks like some pansy who cant work on cars. 7hours boo hoo, what a yutz. go under the passenger side dashboard, remove the blower motor, reach inside and remove the resistor. replace the resistor, replace the motor. done and done. if it takes you more than an hour please return your car and your man card

Well since that is such a certainty I would love to see a write up with pictures to that effect. Ive replaced mine and it was no easy chore. In fact I had to go buy one of those flexible shaft nut drivers just to get to that one bolt holding in the resistor that is up against the slope of the floor board.

Its fine to make such a statement if it were indeed that easy. It didnt take me 7 hours but it was a few hours getting that sucker out of there. Remove the seat so you have room to lay down and do things, then working against the slope of the floor board getting those bolts out and so on. I highly doubt its simply an hour long job.

But, I would love to see it done that quick, more so, the write up to go along with it that shows how to do it that quick. I am EXTREMELY comfortable working on cars and have done so for a long time and even on a exceptional day I doubt I could get it done in an hour.