Quote Originally Posted by Scottydoggs View Post
if the window switch is running backwards the power lines are backwards to the regulator.

cutting and soldering maybe the only way.

you know what....look at the plug end on the regulator, see if you can pull the wires out, ( most of the time theres a clip inside the plug to release them) and swap the pins around in the plug. someone may have goofed at the factory.
!Scotty, you were right. It was just the two wires switched around from the factory. I crossed the wires and soldered them back together. The wires were fused into the socket so they weren't removable. Putting in those regulators is fun. Not hard at all and it only cost $33.00. Thanks again!