I have a 99 grand prix. It had a mass air flow sensor code so I replaced the sensor. It went off for a few days then came back on with the same code. The connector was loose so I replaced that and it went off for a few more days. I have an apt to get it inspected today and the check engine light came on as I was pulling into work. I have herd that you can pull the ECU fuse and kill the codes so it will pass with out losing all its memory like it would if you un hooked the battery. I cant find the fuse for starters and does anyone know if it will pass an inspection if I do that. Im not sure if it has to go through all the drive cycles first.