comatoast 
For the money you can't beat a Spectre.Originally Posted by comatoast
Plain and simple.
I've just never been a fan of the over oiled K&N's...especially when you pull them out of the box and they turn your hand red. It's a good time.
|
|
12-06-2012
For the money you can't beat a Spectre.
Plain and simple.
I've just never been a fan of the over oiled K&N's...especially when you pull them out of the box and they turn your hand red. It's a good time.
12-06-2012
Just bought one last night, in all honesty I like it better than my old kn lol
12-06-2012
Over oiled filter + external MAF sensor = fun times.
Dry flow FTW.
12-06-2012
I agree with all of you guys. KnN way over oiled. , but isn't the spectre oiled as well? I would buy a spectre right off the shelf but like posted above, with the MAF the way it is and then u slap on a cone filter right on it, aren't all oiled filters going to soak the MAF? I would get a dry filter if we had em.
Anyone ever check the MAF or clean it out when running an oiled filter?
12-06-2012
I think spectre has a slight coating of oil, but I don't really know. I run a AEM dryflow filter.
12-06-2012
The one I just bought last night has no oil on it
12-06-2012
Just the basic one from the parts store. Got a p/n?
12-06-2012
AEM FILTERS ARE ON TEH SUPER SALE AGAIN.
Buy one, now, its that good of the deal.
Aem 9"x4" Conical Dryflow Air Filter Element 21 2059DK | eBay
12-06-2012
Don't have a pn, but it was the 40 dollar spectre filter. I believe it's a 9 inch come, fits 3-3.5-4 inch holes. I just used 4 inch and tightened it down. And just pick up a rubber coupling for the maf to tie into the throttle body. You will see everything on my ride page
12-06-2012
The MAF and tb are 4 inch openings? Didn't look that big when I had the tb off
12-06-2012
???
Use a rubber coupling to reduce the size.And just pick up a rubber coupling for the maf to tie into the throttle body.
12-06-2012
Ahhh!!! That what I've been asking!!! What size!?! 3-3 4-3?
12-06-2012
If you were to buy that AEM filter you need a 4-3 I believe then tubing from the MAF to the TB.
12-06-2012
The spectre has rubber inserts so you get to choose which size you want...IIRC there is a 4", 3.5", and a 3" reducer.
12-06-2012
Thought I mentioned that lol
12-06-2012
After a fresh filter/ new oil, clean maf in like 30 days, then few months from there.
12-06-2012
Exactly, the filter I got came with 4-3.5-3 reducers on the filter
12-06-2012
Thanks Guys. Local shop had a 9" spectre for $40 ( like posted above ) Gonna try it out
12-06-2012
I like it so far, prob got the same one, I got red :-)
12-06-2012
Well here's my issue as the intake is tore apart. I don't wanna remove the stock back half of the box cuz I wanna keep the PCM in there. Would a 6" be fine? Only reason I'm asking is because I wanna leave the stock intake tube ( the one from the tb to the MAF ) intact. And I can't fit a 9".
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
