Quote Originally Posted by Wotgtp View Post
But he made 350whp on his tvs swap, and the blower still has more to go. He didn't need to spend a lot of time mocking up or making his own IC kit. I think all he did was relocate the Alt, bolt on the spacer and TVS, do a PCV breather and block the EGR. His N* spacer bolted up to the TVS and it works, but to be honest he would most likely need one made to better clear the brake booster. I thought he just spent $1500 on the swap, for the adapter plate and the TVS.



Where do you get the 5k number from?
SLoW SHO

So far the budget isn't working out too bad...

TVS with 3 pulleys $1200
Adapter plate $300
M62 for mockup $80
Alt Relocation $60

Sold my GenV and pulleys/MPS for $700

So far this has cost me $940. I'm pretty confident that I wont need a whole lot more as there isn't much left to do.
Don't need the m62 for mock up anymore, we know the swap works.
Basically you need the blower, plate, alt reloc, and TB adapter. Fuel upgrades are needed if not already done, depending on your goals. Stock injectors will take you to just over 300whp.