After changing my power steering pump the belt chirps loud. it chirped before but now its twice as loud, would changin the belt fix this or is there somehting else?
|
|
05-21-2010
After changing my power steering pump the belt chirps loud. it chirped before but now its twice as loud, would changin the belt fix this or is there somehting else?
05-21-2010
chirping or squealing? chirping is not the belt, squealing is.
05-21-2010
"chirping" could be a tensioner maybe
05-21-2010
i had a chirping sound when i had a bad bearing in the alternator... i didnt cover it up the first time i washed the engine bay and im sure water getting inside it had something to do with it....
05-21-2010
yea i have a nasty squeel in my ac compressor but im to lazy to fix it and its only when it gets wet hope i make it through the summer
05-21-2010
my belt is squealing too.Originally Posted by TorqueAutoMotiv
05-21-2010
My chirping/squealing turned out to be the tensioner pulley that decided to sieze up, and then the belt burnt a hole in my power steering pump resivor. It was rusted so bad that the bearing reatainer thingy was deteriorated. But this happened a couple months after that noise went away. Ended up being a nice 2 mile walk, because I forgot my cell phone..... and am a moron because I forgot about OnStar thats on the vehicle....... live and learn I guess.
Just take an old piece of 1" hosing or something and use a sort of "stethescope" and listen to each pulley while its running. Just be careful of the belt....
05-21-2010
well it was doing it before i replaced the pump,, then got twice as bad when i put it all back on, my usual mechanic said it was the belt because one of the sides was worn down before i replaced the pump
05-24-2010
found the problem the belt on the AC was off just a little
05-24-2010
my belt makes all kinds of noise if i hit a big puddle but a quick rev gets rid of it....
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
