Well im gettin headers in a few weeks, and wondering what everyone went with...im pretty set on T.O.G. headers, but i know i could go the cheaper route...any suggestions?
|
|
11-16-2009
Well im gettin headers in a few weeks, and wondering what everyone went with...im pretty set on T.O.G. headers, but i know i could go the cheaper route...any suggestions?
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries 
11-16-2009
I love my SSAC's
11-16-2009
SS Autochrome's are Knock Off SLP's. Best Buy for you money hands down, that is what i'm getting when I get some money saved back up.
11-16-2009
What better company than SLP to knock off right? haha
11-16-2009
except for the goofey hump in the downpipe. but that can be fixed.
11-16-2009
SSAC's are def the way to go. just beware of the band clamp joints (prone to leak) and flexpipes. pacesetter headers are good IF the rear header has been welded to the crossover.
11-16-2009
My pacerusters are awesome. Just get them welded.
http://www.grandprixforums.net/f73/l...ion-16085.html
11-16-2009
do u guys really think zzp headers are over priced?
11-16-2009
Well mine where half the cost and do the same thing.
11-16-2009
thats a yes
11-16-2009
ZZP is WAY overpriced IMHO
11-16-2009
So i realized the SSAC are like half the price, but if went with these, what has to be done to them to keep them lasting (modifications to problems with them). I'm really thinkin about these becuz of the price...
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-16-2009
get real clamps (torca i think>????) instead of the chinsy clamps they have... i have heard of flexpipe probs but on what set of headers dont? lol
11-16-2009
Alright sweet, all i need are some good clamps...and one more question, performance wise it would be the same hey??
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-16-2009
yup. far as i know
11-18-2009
i just installed my SSAC headers over the weekend, just remember good band clamps and use some copper rtv and they should seal just fine, and incase you didn't know you will want to drop the rear part of the sub-frame.. it makes life a whole lot easier
11-18-2009
Another +1 for the SSAC. I bought some band clamps at NAPA i cant remember the specific name but they were like a sheet of metal about 4 inches wide with two bolts, they stretch around the pipe and sealed right up, i did copper RTV the hell out of the slip joints and tightened the clamp bolts until i couldnt turn it anymore, but no leaks what so ever.
Only other thing that might give you trouble is the flex section, i think i may have a small tick coming from mine. Other than that they cant be beat for the money, the shiney stainless steel looks alot better than the rusty manifolds under the hood too.
11-18-2009
S&S headers are the best install. if youre not planning on a heads/cam/intercooler build then they will work just fine, even with the smaller primaries. hell, i would put them on an all out build too just because all the slip fit headers out there suck. anything three piece sucks. two piece with one donut gasket, S&S did something right.
12-10-2009
well the headers are installed now and i have no leaking issues..seem sweet but i can't really test teh car out due to the snow...but now my sel came on...any ideas?
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
