Thread: Tried everything for this misfire

Page 1 of 3 123 LastLast
Results 1 to 20 of 47

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1 Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Some of you may have seen my thread from a few weeks ago about fixing a misfire. Well here is the update:

    Plugs- new
    Wires- new
    Coilpack- new
    Injector- replaced with tested good one
    Cleaned every connection I could possibly relate to the issue.
    No boost/vacuum leaks

    Car is still misfiring when it sees any boost at all, runs great under non-boost conditions though. This Saturday I'm gonna replace the ICM in hopes that it's the issue. Any input?
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  2. #2 Re: Tried everything for this misfire 
    GTP Level Member Tonkin2000GT's Avatar
    Join Date
    Jul 2015
    Location
    Jamestown, NY
    Posts
    905
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Did you do a compression check?

    Sent from my SM-G920V using Tapatalk
    00 Grand Prix GT, top swapped, .020 FMP, GT1 Cam, SFI Crank pulley, SSM90, 3.3 MPS, ZZP ported Gen 3/LIM, ported heads, #90's, N* TB, SLP Intake/Headers/Catback, F-body brakes, KYB AGX, Aeroforce, AEM, 93 octane.
    Reply With Quote  
     

  3. #3 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yes! Knew I was forgetting something, I checked compression and it tested perfect!
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  4. #4 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Its only cylinder 1 btw
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  5. #5 Re: Tried everything for this misfire 
    GTP Level Member Tonkin2000GT's Avatar
    Join Date
    Jul 2015
    Location
    Jamestown, NY
    Posts
    905
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Weird

    Sent from my SM-G920V using Tapatalk
    00 Grand Prix GT, top swapped, .020 FMP, GT1 Cam, SFI Crank pulley, SSM90, 3.3 MPS, ZZP ported Gen 3/LIM, ported heads, #90's, N* TB, SLP Intake/Headers/Catback, F-body brakes, KYB AGX, Aeroforce, AEM, 93 octane.
    Reply With Quote  
     

  6. #6 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Tell me about it lol driving me insane!
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  7. #7 Re: Tried everything for this misfire 
    GTP Level Member Tonkin2000GT's Avatar
    Join Date
    Jul 2015
    Location
    Jamestown, NY
    Posts
    905
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    How much boost are you running ? Is the car stock?

    Sent from my SM-G920V using Tapatalk
    00 Grand Prix GT, top swapped, .020 FMP, GT1 Cam, SFI Crank pulley, SSM90, 3.3 MPS, ZZP ported Gen 3/LIM, ported heads, #90's, N* TB, SLP Intake/Headers/Catback, F-body brakes, KYB AGX, Aeroforce, AEM, 93 octane.
    Reply With Quote  
     

  8. #8 Re: Tried everything for this misfire 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    what plugs you use?

    icm could be bad, or a bad wire some where.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  9. #9 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Wires were tested and found good, TR6 plugs that are 300 miles old.

    Car isn't stock but the car was driving great before like 3 weeks ago. No new mods were added, 3.5 pulley btw.

    I compression tested and checked plugs to make sure I didn't chip piston or have carbon buildup on valves
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  10. #10 Re: Tried everything for this misfire 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    are you using a real plug socket? time to time the porcelain cracks during install of the plugs if you use a normal socket.

    and by wire i mean one from the cars harness, like a injector wire or a wire near the pcm. things can rub through.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  11. #11 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yea I use a plug socket, I try not to be a hack as much as possible haha the only thing I didn't put the multimeter on is the injector lead. I ohmed the injectors themselves but didn't test the leads going to them. It's just so weird that it fires fine under normal conditions but skips in boost. The only other things I can think of is bad ICM or a bad wire giving reduced voltage to the plugs/injectors
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  12. #12 Re: Tried everything for this misfire 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you 100% sure the wires are on right? sh it happens lol

    what are the plugs gaped at? this start after or before the plug change?

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  13. #13 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Do you mean plug wires? Lol yes I'm 100% sure they are on right hahaha
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  14. #14 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Plugs are at .55 gap, but this problem was actually worse before plug change. Plugs helped a bit, any chance it could be a glitch in the PCM?
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  15. #15 Re: Tried everything for this misfire 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you can also look around for a rubbed wire, the metal loop at the dog bone that hols the harness, near and to the pcm, injector harness icm harness and the likes.

    ive ran those plugs for like 20 miles, went to al 104's gaped to 0.50, car loves them so much better.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  16. #16 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Really? See my car likes the TR6 wayyyy more! Next Saturday imma get an ICM from the junkyard and start looking for freyed wires I guess lol
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  17. #17 Re: Tried everything for this misfire 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you need to play the gap game with any plug till you feel whats seems best. i gaped em at 60 then 55 then 53 then 50.


    nothing felt as good as the 104's gaped to 50, did the same drill with both plugs.


    yes thats a lot of plug pulling. and it kinda sucks.


    either way, unless the plug is cracked i cant see the brand or temp being the misfire.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  18. #18 Re: Tried everything for this misfire 
    GT Level Member Dadkota's Avatar
    Join Date
    Feb 2014
    Location
    Rhode Island
    Posts
    210
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I just can't figure it out for the life of me, almost to the point of just buying a new GP lmao
    '01 GP GTP- Intake, Plog, 3" DP and Exhaust, DHP tuned by me, GMPP sway bars, 3.5 MPS, cold plugs and tstat
    -180,000 miles and climbing
    Reply With Quote  
     

  19. #19 Re: Tried everything for this misfire 
    GTP Level Member Tonkin2000GT's Avatar
    Join Date
    Jul 2015
    Location
    Jamestown, NY
    Posts
    905
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'm pretty sure I have a extra ICM laying around from when I did my top swap

    Sent from my SM-G920V using Tapatalk
    00 Grand Prix GT, top swapped, .020 FMP, GT1 Cam, SFI Crank pulley, SSM90, 3.3 MPS, ZZP ported Gen 3/LIM, ported heads, #90's, N* TB, SLP Intake/Headers/Catback, F-body brakes, KYB AGX, Aeroforce, AEM, 93 octane.
    Reply With Quote  
     

  20. #20 Re: Tried everything for this misfire 
    I live here. ericspecullaas's Avatar
    Join Date
    Feb 2013
    Location
    37.295091, -121.930053
    Posts
    6,767
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    did you try throwing the kitchen sink at it? all joking aside i hope you get it fixed
    im a cookie again yay me
    Quote Originally Posted by Bio248 View Post
    please learn to forum better.
    ^^new favorite quote
    Quote Originally Posted by Kilroy View Post
    It is a type of spiced shortcrust biscuit.
    only one person looked it up lol
    Reply With Quote  
     

Page 1 of 3 123 LastLast

Similar Threads

  1. Misfire
    By Comp04 in forum General Grand Prix Discussion
    Replies: 4
    Last Post: 11-20-2012, 12:46 AM
  2. Misfire
    By Teddyb in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 10
    Last Post: 11-20-2012, 12:28 AM
  3. Misfire?
    By blackflag in forum General Tech Discussion
    Replies: 5
    Last Post: 03-14-2012, 09:41 AM
  4. Very Bad Misfire
    By SDGTP99 in forum General Tech Discussion
    Replies: 9
    Last Post: 05-12-2010, 09:17 PM
  5. Cylinder #1 misfire and random cylinder misfire
    By whodat79 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 8
    Last Post: 04-21-2010, 07:16 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •