Took no pics but let me paint a mental image. For the long spacers I took a 7/16 nut, drilled the middle to 1/4 and chamfered the hole, and sanded the nut a little to make it shorter.
Total length for the long spacers is right in between 3/4" and 1".
3/4" is the length of the transgo long spacers, and 1" is what you want for a hard shift kit. Me going in the middle, I hope it actually meets somewhere in the middle. Now that I think of it, I also added springs. Not sure if that will make them too hard. I still have the accumulator on the bench.
That's what I've got for lowers.
Uppers are stock for 1-2 and slightly longer for 2-3
Sent from my HTC One_M8 using Tapatalk