Thread: What did you do to your car today? Vol 2.0

My bad for not being familiar with the part or spacing what you already told me about it. You could probably get away with just shoving the res-back forward if all you need is a quarter inch more. Tweak the hangers? Make up the diff when you add tips? If clearance was there anyway. Personally in your situation I think I'd splice on an extension to the cut end and burr out the ID real smooth then proceed as you wish. If it ain't long enuf, make it so! Just weld it up using those mega-zap lamps and a magnifying glass! Kidding. Jokes' on me, I have the poppop sound when I lift off the gas. Need more louder radio.

Put in my KYB AGX's with Vogtland's. After a 4 wheel alignment it should be great

Also found out I need a CV shaft and a ball joint on the driver side.

Eventually sway bars and end links.

Ordered Retros and housings for the 06.

Originally Posted by 02NavyBlue

Ordered Retros and housings for the 06.

Hopefully you got the 7.0s!


Sent from my iPhone using Tapatalk

Duuur


Sent from my iPhone using Tapatalk

I'm prepping for my lim uim hv3 job too

Sent from my SM-S820L using Tapatalk

Originally Posted by REDCRAPGP

Duuur


Sent from my iPhone using Tapatalk

Shut it Mr. Lol


Sent from my iPhone using Tapatalk

bought and installed a new battery. went for an alignment, but the pass side rear bar would not move. time to replace all that crap now.

then go back and have it done.

Time for some BMR goodies! ^


Sent from my iPhone using Tapatalk

A 04 comp g sway bar and links would mount right up for me wouldn't it? If everything I've read is right

Sent from my SM-S820L using Tapatalk

Rear yes

Front... Depending on which control arms setup you have.


Sent from my iPhone using Tapatalk

Originally Posted by REDCRAPGP

Time for some BMR goodies! ^


Sent from my iPhone using Tapatalk

more like one dorman bar lol f it.

Lmao


Sent from my iPhone using Tapatalk

Originally Posted by Russosaur

Damn so you were the weirdo I sold laminate flooring too who said it's going in his car.

Jkjk

Looks different, I dig it.

I used to work at menards in the flooring dept. There was a guy that came in to buy carpet to line the room and walls of his van. Not sure what happened to him or his van but im pretty sure where he goes, kids go missing.

Replaced\upgraded\whatever a fuse under the hood, 1 of 3 I ordered for the trunk battery install. That install hopefully will happen next weekend, or maybe the weekend after.

Originally Posted by BoostedPontiac

I used to work at menards in the flooring dept. There was a guy that came in to buy carpet to line the room and walls of his van. Not sure what happened to him or his van but im pretty sure where he goes, kids go missing.

Oh man so you know the pain of moving tile

Halfway done with my shift kit. Did a transgo kit, and used 3 springs in both bores, as well as made a spacer for the top of the 1-2 bore.

Then as an improvement, I added a tiny spacer on top of both long spacers.

Sent from my HTC One_M8 using Tapatalk

Would love to see some pics

Sent from my SM-S820L using Tapatalk