Thread: What did you do to your car today? Vol 2.0

Originally Posted by idrivejunk

The only times I've seen the fail like that is those with the integral actuator. You sure were lucky to get it latched once more. A bungee between armrests might be cheap insurance if the part takes long to get.

Maybe I'll take a video of it or something with my ****ty potato phone.

Just to show what happened to it.

Today was wonderful so far, had a slight pulley noise this morning upon starup. 10 mins down the road it came back and bam! crank pulley is bad. Ate a belt in the process. Great month so far. New alt, water pump, and abs module. When does it stop lol

When you sell the gp.

never!

Originally Posted by 02NavyBlue

.....negative magnetive effects.

He-he.

Lol. Pulled a pan just now, metal flakes all in the pan, and the magnet got overloaded with just a small amount of particles. It already gave up



I ran a magnet of mine over all the clutch material, and I can see little spots jump out toward it. The stock magnet isn't helping at all
Sent from my HTC One_M8 using Tapatalk

Hot tub gave up last night

Sent from my SM-S820L using Tapatalk

Originally Posted by idrivejunk

Run everybody else off.... ALL MINE! If somebody would buy them after and I had a little shop, I know where to get a steady supply of Pontiacs to build.

edit: AND Chevys!

you know whats funny is that pontiacs are chevys with better interiors

Washed it.

Originally Posted by ericspecullaas

you know whats funny is that pontiacs are chevys with better interiors

I ain't messed up about that... one of my favorite Pontiacs was OE Chevy powered and stayed that way even after the engine swap.

this is what I did

Sent from my SM-S820L using Tapatalk

Underglow


Sent from my iPhone using Tapatalk

I can turn them on and off separate

Sent from my SM-S820L using Tapatalk

Do those help you confirm when you're high centered on a snow bank? Sorry, couldn't resist. Can't be plowin anymore, with those on can ya?

I can still plow lol

Sent from my SM-S820L using Tapatalk

Here's the passenger side.

Sent from my SM-S820L using Tapatalk

Oh I thought the glow was new, not the puddle lamps. Honestly I think those are cool and you got the best ones. Plow on!

Drove both FWDs today. They are fine. At least two are the same, I find myself reaching for cruise or a window switch in the 69 at times.

The cypress tree in my yard has dropped it's annual goo all over the GT. Hopefully winter will wear most of the sap off. In spring, an alcohol bath will be required to get off whats left. Wicked stuff. I knew it was coming but never parked in the street before. It got it bad.

Put my tire back on my g6 after tpms sensor broke. My tpms light is on, because i didn't wanna pay a shop 120$ to fix it, instead I paid 10$ for valve stem to be replaced, now lights are going crazy on the g6.

My gp was slipping out of OD, going 60 was at 2k rpms, went down to 52, and then gave gas and was up to 3k rpms before it went back in. Time for it to go mabey.

Originally Posted by idrivejunk

Oh I thought the glow was new, not the puddle lamps. Honestly I think those are cool and you got the best ones. Plow on! .

LIKE A BOSS!!!!

The puddle lights are new yes and they come on with the interior lights and go off with them they took a bit time mainly because it took forever trying figure out how to tap into the door switch because there is no pressure switch like old cars it's the latch when it goes down like it's latched then it turns the light off so I said fck it and ran a wire up to the dome light and tapped into it.

Sent from Mars

Originally Posted by Mirraco

Put my tire back on my g6 after tpms sensor broke. My tpms light is on, because i didn't wanna pay a shop 120$ to fix it, instead I paid 10$ for valve stem to be replaced, now lights are going crazy on the g6.

My gp was slipping out of OD, going 60 was at 2k rpms, went down to 52, and then gave gas and was up to 3k rpms before it went back in. Time for it to go mabey.

You do know you can program the TPMS yourself right? It's the same as the relearn procedure after rotating tires. I just did it to my car a few weeks back when I replaced one.