Thread: What did you do to your Car today?

Hate* not have.

Darnet

Sent from my Galaxy Tab 3 8.0

Clay how long did it take to pull this one?

Originally Posted by Mindcrime

Changed all 6 spark plugs and now have a misfire on #2! Time to scrape those knuckles again

I bet you cracked the plug tightening it. Before doing plugs on the GP I had never broken a plug before. When I did plugs on the GP I broke #2 plug TWICE. It's a bad angle. GM f#cked us by putting the o2 sensor in the way,

Im buying an 02 socket when I do my plugs and removing that bs.

Sent from my Galaxy Tab 3 8.0

buy a spark plug socket. its got a bolt head at the top, then use a wrench on the socket.

they also have a foam insert to keep the plug from cracking.

Originally Posted by Scottydoggs

buy a spark plug socket. its got a bolt head at the top, then use a wrench on the socket.

I tried that. With the angle there was no way I was going to get it tight. It was still too close to the head/valve cover.

Originally Posted by stealthee

I bet you cracked the plug tightening it. Before doing plugs on the GP I had never broken a plug before. When I did plugs on the GP I broke #2 plug TWICE. It's a bad angle. GM f#cked us by putting the o2 sensor in the way,

The o2 is by #6

Yeah, you're right. I was thinking backwards for some reason, thinking the trans was on the driver's side. #2 was a b!tch to get to, but #6 is the one I cracked twice.

I've never had a problem with them. Spark plug socket and 6" extension and bam done

Might be in a slightly different location due to your ZZP headers.

I've done plenty of stock ones as well. Never an issue

I'm not sure what's up with mine, but with a 6" extension it created a slight bind against the o2.

I use a wabel or whatever it's called, the u- joint looking thing. Never had a problem.

I use the wobble ext for a little extra wiggle room

Woo N/A buddy!

Sent from my Galaxy Tab 3 8.0

No laughing here, I'm living that