For old style using a gen 3 intercooler with a gen 5 supercharger.
Funny, simple formula. The simple formula would be in a college thermodynamics text book. Start in chapter 1.
|
|
03-21-2014
For old style using a gen 3 intercooler with a gen 5 supercharger.
Funny, simple formula. The simple formula would be in a college thermodynamics text book. Start in chapter 1.
Last edited by sseilmnop; 03-21-2014 at 08:24 PM.
03-23-2014
Learning new mill and the software is very time consuming
03-23-2014
That is so sexy! These new intercoolers will stay aluminum or eventually switched over to phenolic?
03-23-2014
It's a phenolic sandwich. Aluminum on both sides with 1-1/2 phenolic in the middle.
The phenolic
03-23-2014
i wish i had a toy like that. nice work.
toy my ass i bet that equipment cost a boat load.
03-23-2014
That is really nice! How much will these new intercoolers go for?
03-23-2014
First 2 only for same price !!!!!!
Gen 5 for $554 with bolts.
03-23-2014
My 02 ssei I just bought from Charlotte with 41,000 cost less.Originally Posted by Scottydoggs
03-23-2014
1. New core is on center of the manifold air inlet.
2. Big core, just a little bigger than zzp.
3. 3/4" connections Not 3/4 reduced to 5/8.
4. Connections are bent for better hose clearance.
5. Working PCV (no modification to LIM)
6. 1-1/2" phenolic in center
03-24-2014
The cores don't come pre-sealed right?
I have a 3800SC swapped P Body and need the connections pointing in the opposite direction than a W Body.
I assume I can flip the core to point the hose connections in either direction?
03-24-2014
I hadn't decided about pre-sealed for new intercooler. The connections are not on center so the core can not be flipped.
03-24-2014
If feasible, I would love the have my core pre-sealed.
Looking fantastic.
LMK, when mine is ready.
03-25-2014
Includes bolts and block off plate for gen 5.
L67 throttlebody to Gen 5 superchargers are now available. Includes port so that you can get your PCV to work. ZZP and WBS adapter don't have port for PCV to work.
$100
03-25-2014
When will you have a gen v available
03-25-2014
I'm hoping to have 2 gen 5 intercoolers done this weekend. One is spoken for. I have material to make 4 total.
Mounted my coolant system on the new mill today to improve my feeds and speeds.
03-26-2014
What is needed to seal off the coolant passages to the SC? ZZP O-rings?
03-26-2014
OEM yellow O-rings. There will not be a hole in intercooler so it will block the passages.
Could also 1/4 pipe plug the ports.
03-26-2014
New gen 5 manifolds don't have c'bores for I-rings. RTV or pipe plugs.
03-26-2014
Are you still on track to get them finished this weekend?
Have you decided yet. if you are going to pre-seal the core?
Bump for more pics?
03-26-2014
On track for this weekend. I'm going to seal your core for sure.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
