You'll need a 21mm deep well, 21 mm wrench, 18mm wrench, and a t55 torx bit. I used my impact and that made it go ok. I had to cut my ball joint off because the whole thing was spinning.
|
|
01-30-2012
You'll need a 21mm deep well, 21 mm wrench, 18mm wrench, and a t55 torx bit. I used my impact and that made it go ok. I had to cut my ball joint off because the whole thing was spinning.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
