First off the amp is a kicker kx800.2 2 channel Kicker KX800.2 200W x 2 Car Amplifier - Hands-on Research at Crutchfield.com

subs 10" coustic Coustic CF1044 10" Dual 4 ohms Subwoofer - Sonic Electronix

So here is the issue, at first i had them hooked up at 4 ohm to 4 ohm bridged and had the freq db and gain all set at 3/4 and i was smelling a buring smell so i figured maby my wiring or i was pushing the subs to hard. Well i noticed when i took the power cable fuse out it was burning so i tried hooking it up as 2ohm to 4 ohm and i read that turning the gain up and the db down was better so i did but now my lights are kind of flickering and the amp is shutting off for a second then turning back on it seemed alot louder like this and i dont smell that burning anymore either
im thinking maby it is my wiring to, i got that 1200 watt kit from walmart with i think a 4 gauge wire and it comes with a 80 amp fuse for it
also i was wondering what should my freq be at if the amp is 50-200 and my subs are 36-150, if there are 2 subs should i just max it on the amp?


btw my car is a 2000 gtp