|
|
05-06-2010
How did you run your amp wiring (or any other aftermarket audio equipment) through your car?
i dont need help just wondering how everyone else ran their wires.
mine are ran through the right side door sill panels into the deep right corner of my trunk, and on the other side, rca's/terminal go up into the dash and power foes through that little grommet.
i just rewired mine and felt like knowing how other people did it
05-06-2010
If you have rca's on the opposite side as you power wire your good to go. I dont even know if that is required but thats what ive been told to do in teh past and it makes sense to me so thats what I do
05-06-2010
thats to keep interference down...Originally Posted by kjohnson
anyhow i have my 0/1 gauge running down the passenger side along with the remote and rca
i have the ground on the right strut tower.
you can't see any wires tell you get to the very back right of the trunk (and no one sees that anyhow due to my box...)
05-06-2010
Four amps... Big mess back there...
You don't need to separate wires all that much, amps generally have DC filters so they'll never output that signal.
You can get around that by having them cross perpendicular to one another.
Not to say I didn't wire them with the RCA's on the drivers side and power on the passengers.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
