Thread: This is shot right?

May be a noobish question but is this engine mount shot? Mabye causing KR its so shot?

Yep that's junk

That'll buff out.

Get solid mounts... : )

naw just a bit of clean up and a new mount and should be good as new

Hahaha, just picked up a new one, could this be causing KR?

Possibly

Well here is after the new mount, if anyone takes this on themselves do yourself a favor and get a 15mm ratchet wrench for the top 2 nuts. Right away I could tell the engine moves less, got a solid rubber mount at napa for 45 bucks I couldnt bring myself to pay 160 for the polly mount on zzp. No vibration and engine doesn't move. seemed to have got rid of about .5KR after a few WOT runs. When I put the two pictures side by side you could see the new mount brought the engine up about 1/2 an inch.


[IM
][/IMG]

Originally Posted by addzradd

Weird the engine is sitting that far back on the mount.

Wondered the same thing. Any ideas?

Originally Posted by addzradd

Weird the engine is sitting that far back on the mount.

park on level ground, put the e brake on with the car in neutral, then let the brake hold the car still, then put it in park, then go look at it again. if on a hill small as it may be the car will roll back or forward and move the engine a bit.

Next time get a day off Ill look at the trans mount but the car has almost no rollback on a hill. I should also mention I flipped my dog bone mounts. The engine feels very firm in place.