Thread: Top swap not making power! Help

One of the first runs on the dyno the torque maxed out at 350 but the horse was like 170 with 10 degrees of timing and very low boost. The he hooked up the wires differently under the hood then both numbers were around 170

Originally Posted by Steven Monteith

One of the first runs on the dyno the torque maxed out at 350 but the horse was like 170 with 10 degrees of timing and very low boost. The he hooked up the wires differently under the hood then both numbers were around 170

This is discouraging.

I would like to see what you have connected where.

Better yet, google L67 vacuum routing diagram and see what comes up.

Originally Posted by matt5112

This is discouraging.

I would like to see what you have connected where.

Better yet, google L67 vacuum routing diagram and see what comes up.

This is before taking it to the dyno tune
http://i1322.photobucket.com/albums/...edownload.jpeg