im just going to end up taking the bolts out and going to the hardware store with them. as long as i know they are 8mm bolts then im fine.
i just need ones that are an inch longer for the ssic.
|
|
06-19-2008
im just going to end up taking the bolts out and going to the hardware store with them. as long as i know they are 8mm bolts then im fine.
i just need ones that are an inch longer for the ssic.
06-19-2008
Just get m8 x 1.25 pitch studs and cut them to length. I have found them on the web for as little as $3 for 24" section. It will make the install much easier with studs also.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
