Thread: the stock supercharger belt will work on a 3.4 setup right?

Originally Posted by pizzi22

Get the Gatorback belt from autozone. 4060660. that is the belt size. it's 66". it's for a 3.4" pulley

Gatorbacks suck. Get a stock Gates replacement. Gatorbacks stretch. And FWIW...There is a guy here running a 3.2" belt on a 3.4" setup and that car rapes SSIC'd cars...hmmm...I wonder

Originally Posted by 01GTP

Dont blow you car up again.

X2

Originally Posted by Bio248

thats likely.

X3

Originally Posted by Iron Indian

Just like what was said, its one bolt and that bigger tensioner pulley slightly increases belt wrap all for under $15...

Agreed.

The stock belt is fine, just use it and if you notice some belt slippage then go with the oversized tensioner or a smaller belt.

I've been running the stock belt on my 3.4 setup for awhile now and haven't noticed any belt slip at all...